The automatic beverage production line adopts a bottleneck structure for transportation. The cleaning agent is evenly applied to the surface of the filling machine, and then a damp cloth is used to slow down Wipe slowly to clean the body of the filling machine in the automatic beverage production line.
It cannot be cleaned with water, but must be cleaned with a special cleaning agent.. When the front cover enters the slideway, you can enter the cover feeding tray smoothly. Check whether the various parts of the automatic filling machine are abnormal or loose, the lubrication status of gears and conveyor belts, and whether the working power supply has leakage. The frequency converter is used to control the speed of the main motor of the machine.
The main drive of the automatic beverage production line adopts a gear drive that is a combined drive, which has high efficiency, low noise, long life, convenient maintenance, and sufficient lubrication. A pair of slides are also provided Photoelectric switch, when detecting that there is no cover, it will stop the host immediately. In order to prevent accidents, an anti-reverse cover dial is also configured on the slideway to ensure that the cover that enters the feeding cover tray is correct. The frame of the film feeding mechanism is suspended on the frame of craft beer brewery equipment Manufacturers the main frame. A filling pipe is installed in the center of the main frame, which is connected with a quantitative feeding device.
The cleaning agent can effectively remove the rust. This is because during the filling process, the filling machine encounters acid and alkali corrosion, and the filling port is prone to rust. The film feeding motor is installed on the mechanism frame, and the swing rod type film storage mechanism is installed on the upper part of the film feeding mechanism frame. The automatic filling machine uses no Grade frequency conversion speed regulation.
The bottle guide system has a simple structure and can be quickly and conveniently changed according to the bottle type. This can extend the service life of the filling machine. First, cut off the power supply and stop the operation, so as not to cause more serious damage to the filling machine. Then use a sponge to soak up the liquid on the surface of the filling machine