For 0.5 kW, the area of ​​high quality cables greater. Its design has the advantages of power saving. Select a pile having a certain strength according to the depth of the cultured water.the rope must not be loose, but it is not too tight, 10-15 cm from the surface is appropriate. Second, the rope requirements; 1, the nylon rope having a diameter greater than 6mm or more should be used to prevent rope breaks and damage to the survival oxygen generator.each machine is equipped with a switch that cannot be paralleled with multiple machines or in series.The incorporated oxygen generator is a new product in aquaculture aeration equipment. The aeration principle is different from impeller and turbine.

It can prevent and reduce fish floes, prevent floods from flooding, improve water quality, increase fish food intake and production.8-1m.0 square meters should be used. The unique flower-shaped helical impeller is combined with the annular buoy, which can remove the water upward, so that the water in a certain region boils, thereby improving the contact Wholesale Deep Water Jet Aerators Factory of the water and air during the discharge process, increasing the dissolved oxygen content of the water body. the pile must be firm and cannot be pulled.5 square meters should be used.you should remove weeds and other lifelongs in the range.

Only one cable can be used. Reasonable utilization can effectively increase the dissolved oxygen in the pond, accelerate the circulation of ponds and water, weaken or eliminate harmful substances, and promote the reproduction of floating organisms. Two or more cables must not be connected in series.

Third, the line requirements; The above is about the installation method of the incorporated oxygen generator, I hope everyone can understand more.75 kW, a cable that is more than 1. Next, I will find out how to install it with the oxygen generator manufacturer! First, before installation: Determine the installation position before installation, ready for pile and rope.