Log på Markedsindex.dk   
Opret blog   
Markedsindex.dk Markeder Butikker Debat Blogs
   Du er her: Markedsindex.dk -> Blogs -> DOT Push In Fittings -> The displacement of the stratum tube stretch and compression must be preset
   
dutycoiledair
 | 
Oprettet 16. March 2022 kl. 03:17
 | 
0 kommentarer
 | 
Tip en ven

The displacement of the stratum tube stretch and compression must be preset

It is only necessary to use a metal flat-plastic hose to make mechanical strength from the outside of the vacuum exterior. Every pass, the vacuum switch is broken, and the flat coated hose is made a large displacement, a large number of axial displacement, and the flat coated hose is destroyed by fatigue.

When the vacuum switch is a flat-coated hose office condition, pass or break, when the on-line metal hose demand tensile variation, when the fracture is broken, the stream of metal hoses is compressed, in order to ensure the survival of the vacuum switch , The displacement of the stratum tube stretch and compression must be preset. Other parts of the vacuum arcuating room are not equal to the normal operation, so the fatigue of the flat coated hoses also voted the mechanical survival of the vacuum extinguishing room.

Applying a flat plastic hose of a vacuum switch has a very much impact on its fatigue survival. Therefore, the axial excignitial shift of the flat coated hose vote for the maximum contacts that can be obtained.In addition, the contact of the vacuum switch is equal to the actual axial displacement of the flat coated hose. Products are widely used in construction, machine tools, railways, vehicles, chemical, automotive, monitoring, building decoration, architectural decoration, building materials, decoration and decoration..

Its main contact is located in a vacuum extinguishing room, and the stripped metal hose is a key component in a vacuum extinguishing room. If it is destroyed, push on fittings Suppliers the survival of the vacuum extinguishing room is terminated due to leakage. The flat coated hose is effective in vacuum is closely closed in vacuo switches, and the vacuum switch is a switch facility that is discharging in a vacuum. The flat coated hose is a tight composition of the vacuum extinguishing arch shell.The moving contact movement can also maintain the vacuum arc casing



0 kommentarer


Du skal være logget ind for at skrive en kommentar


Indtast brugernavn

*

Indtast password

*
 
Glemt dit password? Opret et login her

DOT Push In Fittings

Se mere om bloggeren dutycoiledair

Sincerely welcome foreign and domestic new/old customers to contact us for business negotiation, technical exchange and new brass fittings development...

Gå til bloggen DOT Push In Fittings

Læs min blog


Seneste indlæg

Til blogindlæget The hose is very suitable. The working temperature of the metal hose is extremely large

The hose is very suitable...

Not only should local corrosion resistance, pressure res...

Til blogindlæget The most important thing is to pay attention to security issues

The most important thing ...

The fingerprint lock with biometric technology is more v...

Til blogindlæget The package-plastic hose is responsible for protecting them

The package-plastic hose ...

We must have seen the cable, which we are not strange fo...

Til blogindlæget The displacement of the stratum tube stretch and compression must be preset

The displacement of the s...

It is only necessary to use a metal flat-plastic hose to...

Til blogindlæget This is also the most special nature of this hose

This is also the most spe...

The tangible market mentioned here is actually the diffe...


Arkiv